SD Scale Gundam 0080: War in the Pocket Kampfer
Print Profile(1)
Description
Filament:
Recommended Bambu Lab official PLA Basic filament, preferably matte.
Difficulty:
Overall medium, the most difficult part is removing supports from the head; supports must be set this way for the aesthetic.
Tools:
Model snips, for removing supports.
Notes:
I've seen many people report that the ball joints are quite tight. Because PLA material wears out too easily, the models I printed before are already very loose. To ensure longer support, the ball joints are initially tighter. Also, this ball joint is designed to be pressed in from the side when installing, which makes installation a bit easier. And if installed right after printing while still warm, it won't be as tight, but it will also loosen faster.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)