SCX30_Magnetic Holder Front_Rear std._V2

Very simple body holder for SCX30 Axial, equipped with an additional collar to prevent the body from slipping.

Neodymium magnets in 3x1.5mm format are used.
The standard mount is used at the rear.

I glue the front upper part and the rear part into the body with ShoeGoo (or comparable adhesives).

The file contains three versions of the magnetic top part in 3/4/5mm to adjust the body height.

I printed with Bambu PLA using a 0.2mm nozzle and a 0.8mm layer on the H2D with very slow settings.
(1st layer 15mm/s; Infill 1st layer 30mm/s; Outer and inner wall at 80 mm/s)

Depending on the printer or filament, slight post-processing may be necessary.