Tumbler Drying Rack – Dual Holder (Straw + Brush)

This drying rack is designed for tumblers and insulated bottles (e.g. Stanley Cup 40oz/1.1l or smaller 30oz version). The uploaded model is sized for a tumbler diameter of up to 100 mm, but can be easily scaled in the slicer to fit bigger sizes.

There are already several tumbler drying stands on MakerWorld, but most designs only include a single holder for the straw. This model adds a second vertical holder, allowing you to store both the straw and a cleaning brush at the same time. This keeps everything in one place and improves organization.

The printed version shown was made with a 0.2 mm layer height and no ironing, as the holder is placed in a darker corner of the kitchen where surface finish is less relevant. For a smoother result, I recommend enabling ironing and using a 0.12 mm layer height.

If you have suggestions or want modified versions, feel free to reach out. I am already considering a flatter version with an open bottom, combined with a separate drip tray module.