Valorant - Wind-breaking Blade

2026.04.08 New fully disassembled version added, can be printed without AMS.

Valorant Windbreaker Set - Windbreaker Blade

The blade of this weapon uses an orange and blue complementary color scheme, with a reverse grip design. In the game, the blue blade surface has sky blue rhombus-shaped sparkles. Therefore, material selection requires some careful consideration.

Design Notes: For structural strength, the design features a Print in Place blade with interlocking beams enabled. The remaining parts are printed separately, and the blade has been blunted to prevent injury. This weapon is designed for a reverse grip, so a forward grip might feel a bit tight. I extended the grip by 3mm, placing the center of gravity 1cm in front of the thumb web to ensure a good feel for a forward grip.

Material Selection: To better replicate the visual effect of the blade in the game, the blue blade section uses PETG Translucent blue (glitter) to simulate the blade's sparkling effect. Print with 100% infill here to enhance the material's visual effect (transparency, glitter) and overall feel. The orange section uses PETG Matte orange; the matte finish can highlight the blade's highly reflective effect. The white grip uses PLA Silk silver, and the dark gray grip uses PLA Matte gray. The grip logo is dual-color printed, using PLA Silk sky blue + PLA Silk gold (the darker, orange-leaning gold).

Assembly Steps: Glue the upper and lower blade sections together, insert the logo into the white grip slot, then snap the gray and white grip parts together, and finally install the orange tail part.