Bambu Deburring Trimming Kit Gridfinity Holder

This is a lightweight gridfinity holder for the Bambu Professional Trimming Tool Kit (Deburring set).  I tried to optimize it to reduce the filament used while still holding the tool handle and blades well along with a small storage area for extra blades past what comes with the kit. The actual holder is a separate object so if you don't want to use the 2 x 4 Gridfinity bin I selected you can print it by itself or use your own and put it into another container within the slicer.

There are two versions, one open under the blades and one with a little shelf to hold them.  In the pictures the open one is black and orange while the one with the shelf is light brown.  All options are in the same print profile and are broken down into four plates:  one with each holder in a standard 2 x 4 x 3h Gridfinity bin and one with each holder stand alone.

Customizing the Color

If you want to customize the color like I have in the photos you can do this in the slicer:

1. Select the object you want to paint (the tool holder).
2. Click the "Color Painting" icon that looks like a paint can or press N on your keyboard.
3. Select the filament you will be coloring with.
4. Under "Tool Type" click the 4th icon for "Height Range".
5. Set the range to the maximum 8mm and also check the box "Place input box of bottom near mouse".
6. This model is 21mm tall. Hover over the top edge of the model then in the box that pops up type in 17 and click OK. This will create a 4mm band going up starting at 17mm high.
7. Click Return. 

You should now have the original color from the base up to 17mm and then your new color from there to the top.

This is part of my collection of Gridfinity Bambu Maker's Supply tool holders:  https://makerworld.com/en/collections/24692973-bambu-maker-s-supply-tool-holder If I'm missing one that you would like to see send me a message.  Thanks!