Plank TheMaker

cover

plate_1.png

6474f87adbfbb391.jpeg

Configurações principais:<ul><li>Layer height: 0.16 mm</li><li>Initial layer height: 0.2 mm</li><li>Wall loops: 4</li><li>Infill: 15–20% (Gyroid)</li><li>Top layers: 5</li><li>Bottom layers: 4</li></ul>Adesão:<ul><li>Brim: 2–3 mm (opcional, dependendo da aderência)</li></ul>Suportes:<ul><li>Não necessário</li></ul>

Main settings:<ul><li>Layer height: 0.16 mm</li><li>Initial layer height: 0.2 mm</li><li>Wall loops: 4</li><li>Infill: 15–20% (Gyroid)</li><li>Top layers: 5</li><li>Bottom layers: 4</li></ul>Adhesion:<ul><li>Brim: 2–3 mm (optional, depending on adhesion)</li></ul>Supports:<ul><li>Not necessary</li></ul>

0.16mm layer, 4 walls, 15% infill

Esse modelo é uma modificação e personalização de impressao da tampa da camera Sony, espero ajudar.

This model is a modification and customization for printing the Sony camera cap, I hope it helps.

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Sony 6400 camera cap

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models