Sanji - Black Leg - Gravity-Defying Kicking Pose

🍳 Sanji - Black Leg - Gravity-Defying Kicking Pose (One Piece)

"Cooking is a gift from the gods. Spices are a gift from the devil."

Complete the "Monster Trio" with the legendary chef of the Straw Hat Pirates, Vinsmoke Sanji. This high-detail sculpture captures Sanji in a breathtaking, vertical kick pose. Scaled at 129mm to stay in scale with the 1:19 series, this model is a masterpiece of balance and dynamic motion.

⚠️ IMPORTANT: PRINT PROFILE & STABILITY WARNING

This model is a feat of 3D engineering and center-of-gravity optimization. Stability is ONLY guaranteed if printed using the provided 3MF Print Profile. * Variable Infill: The profile includes custom modifiers with higher infill density (40%+) on the supporting hand and lower leg, and minimal infill (10%) on the upper kicking leg.

• Why? This shifts the center of gravity toward the floor. If printed with uniform infill settings, the model will likely tip over due to the weight of the extended leg.

📐 Scale & Build Options

• Total Height: 129mm (from floor to the tip of the kicking boot).
• Stability: Self-standing without a base (when using the attached profile). Balanced on a precise three-point contact system.
• Format: Single-piece high-detail sculpture.

⚙️ Technical Printing & Slice Settings

• Layer Height: 0.08mm (Highly recommended for the suit fabric and facial features).
• Nozzle: 0.4mm.
• Supports: Tree supports are mandatory.
• Balanced Design: Meticulously adjusted in Blender to ensure a perfect standing posture.

🛠️ Post-Processing & Special Cautions

• Required Tools: Standard flush cut pliers and a fine metal pick tool.
• ⚠️ The Supporting Wrist (CRITICAL): This is the most stressed point. When removing supports around the hand on the ground, do not apply leverage against the arm. Cut the support contact points one by one with extreme care.
• ⚠️ Pro Tip: Hold the torso firmly while cleaning the upper leg to avoid putting stress on the wrist contact point.

📂 Browse All My One Piece collection HERE👇

📂 Browse All My collection HERE 👇

Technical & Creative Note: This design is based on an AI generation that I have manually refined and tested on FDM prints to ensure printability and quality. The featured photo is of the actual physical print. I’ve included AI-colored renders only as a visual reference for those who wish to paint the miniature.

🛠️ Support the Process!

💡 What you see is what you get: Unlike many profiles that only upload digital renders of unprintable models, every single design here is fully test-printed, refined in Blender/Meshmixer, and optimized for FDM before release.

I spend hours tweaking geometries, custom supports, and wasting my own filament so that you can enjoy a flawless, hassle-free print on your first try.

If my test-printing hours saved your time and filament, feel free to keep my printers running and fuel the next project! Any support is greatly appreciated: paypal.me/mjrko84