Search models, users, collections, and posts
Print Profile(2)
pla, 2 pairs, plates for 30/40/50mm hoops, 0.12mm layer
Designer
38 min
3 plates
silk, 2 pairs, plates for 30/40/50mm hoops, 0.12mm layer
Designer
52 min
3 plates
Open in Bambu Studio
Boost
43
135
4
0
84
46
Released
Bill of Materials
Description
A pair of lightweight, elegant and fully customizable hoop earrings.
This model is fully parametric, allowing you to easily adjust:
- Hoop diameter
- Hoop thickness
- Attachment dimensions
Designed specifically for 3D printing, with no excessive overhangs (maximum 45° on both the hoop and the attachment).
Bill of Materials
You will need:
Instructions
Each earring has a small attachment hole at the top.
Simply use a jump ring to connect the hoop to the earring hook.
What can you change?
Download the Fusion 360 design file, open it, then go to Solid → Modify → Change Parameters to customize it.
Parameters
| Parameter | Default Value | Description |
| diameter | 40 mm | Hoop diameter |
| thickness | 2 mm | Hoop thickness |
| attachment_hole | 2 mm | Diameter of the top attachment hole |
| attachment_thickness | 2 mm | Thickness of the top attachment |
| attachment_chamfer | attachment_thickness / 6 | Chamfer applied to the attachment |
Overhangs & Printability
This model is made for FDM 3D printing, avoiding any excessive overhangs.
- Hoops are round, with a profile starting at 45° to prevent firsts layers deformation
- Attachments use 45° chamfers.
Printing recommandations
- Use a 0.2 mm or 0.4 mm nozzle
- Enabling the Arachne wall generator helps for the attachement hole.
- Print on a smooth build plate (smooth PEI or similar).
- When printing with silk filament, use the silk print profile for a glossier finishes or follow the printing with silk filaments recommandations:
- Outer wall speed is reduced to 40mm/s.
- Normal printing acceleration is reduced to 5000 mm/s.
- Outer wall acceleration is reduced to 3000 mm/s.
- If you experience adhesion issues, make sure your build plate is thoroughly cleaned.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (4)