Micro Polymer Clay cutters
Print Profile(1)
Description
Boost Me (for free)
Please consider given a boost or rating if you like my models. This helps to keep designs free. Thankyou
For a commercial licence, access to exclusive designs or if you would simply like to support me, you can also visit my Patreon https://www.patreon.com/cw/LunaClay
Random set of 29pc Micro Cutters, size 10mm
Some of the shells have a bit of details so plenty of cornstarch and double press method
I also recommend 100% infill for these
Tips
- the imprint is set at 1mm so clay needs to be rolled clay to 1.5mm or thicker for a clean impression
- If clay is sticking, use cornstarch (or water seems to work well) and also do the double press method - press lightly and lift, then press again.
Print settings
0.4 Nozzle
0.16mm layer
2 walls
100% infill
Wall generator 'Arachne'
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)