Collectible Plush Doll Stand - No Supports, Easy

What It Is

A doll stand/holder, designed specifically for a certain 37cm tall plush tie-dyed doll that must not be named.  Love it or hate it, if you have one and it won't stand on its own, here's your solution. Ours had such defects so I created this holder for display purposes.  It now stands upright on our shelf with minimal visibility of the support piece.  
 

Any feedback appreciated! Let me know if this print was useful to you. 

Design

Two-piece design for easy assembly.  No supports required.  Brims have been added to the end points of the neck piece to ensure the ends don't lift off the plate as they had done in my testing.  
The neck piece is approximately 14cm above the base and the pole is curved to match the curvy shape of the doll. 
The base is approximately 15cm in diameter 
The overall height of the assembled stand is 16cm

This stand was designed with both appearance and printability in mind—no supports required and beginner-friendly setup.

Print Settings (Recommended)

• Layer Height: 0.2 mm
• Infill: 12% (Gyroid)
• Walls: 3–4
• Material: PLA
• Brims (on neck piece)
• Print the pole/neck piece upside down (neck on the build plate) to avoid the need for supports

Assembly Instructions

Insert the pole into the base using the press-fit connection.  No glue required (optional for permanent hold). Designed with approximately 0.15 mm clearance for a snug fit on most printers.  Depending on your printer calibration, light sanding may improve fit. 

Legal Disclaimer:
This 3D model was entirely created from scratch by me independently using original 3D modeling software for the first time ever online for personal use. No assets, scans, or direct copies were used from any existing copyrighted material. The design is intended for personal use only. This model is not affiliated with, endorsed by, or connected to any official brand, franchise, or character. Redistribution or commercial use may require appropriate rights or licensing based on your region. Kindly respect the intellectual property of original creators when using or sharing.