Hobie H-Rail Bracket Adapter (M6 Hardware)
Print Profile(1)
Description
This bracket adapter is designed to mount accessories securely using standard M6 socket head screws and nyloc nuts to the Hobie R-Rail System. The design focuses on strength and clean fitment while keeping printing simple and reliable. The top interface allows attachment of accessories, while the base clamps securely to the H-Rail. Tested for solid grip and easy assembly using M6 x 20mm socket head screws.
Key Features
- Designed for Hobie H-Rail systems
- Optimized for M6 x 25mm socket head screws and M6 nuts
- Clean, low-profile design
- Strong clamping surface
- Works with standard M6 nyloc nuts
Hardware Required
- (5x) M6 x 20mm socket head screws
- (5x) M6 nyloc nuts
Print Settings (recommended)
- Layer height: 0.2 mm
- Walls: 5 (important for strength)
- Infill: 40%
- Material: ABS or ASA (PETG if needed, PLA not recommended for heat/outdoor use)
- Supports: Minimal supports required at the center, can be removed if necessary but internal quality might be affected.
Assembly
- Insert nuts into the slots (including the center one, this cannot be added after the bracket is fully bolted in place)
- Align both halves around the H-Rail
- Tighten evenly using M6 screws
- Do not overtighten — snug fit is enough
Notes
- Recommended stainless steel hardware, corrosion-resistant for marine environments.
Boost Me (for free)
If this model was useful to you, a boost is appreciated.
Boosts are completely free for you and help support continued improvements and future designs.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)