ESP32 S3 WROOM + SN65HVD230 CAN Bus Case
Print Profile(1)
Description
Compact and functional 3D printed enclosure designed to house an ESP32-S3 dev board together with an SN65HVD230 CAN bus module.
Boost Me (for free)
If you like this model, don’t forget to drop a free boost 🚀 it really helps!
🔧 Features
- Perfect fit for ESP32-S3 boards with dual USB-C layout
- Dedicated space for SN65HVD230 CAN module, mounted securely
- Integrated cable routing for clean wiring between modules
- Ventilation slots on top of the wireless chip for improved airflow
- Screw-mounted design for easy assembly and secure closure
- Internal supports to keep components firmly in place without rattling
- Boot and Reset buttons can be clicked from outside
🧩 Assembly
- Solder wires between ESP32-S3 and SN65HVD230 module
- Place the ESP32-S3 in the main compartment
- Mount the SN65HVD230 module in the front slot
- Close the case and secure with screws
🖨️ Print Settings (recommended)
- Layer height: 0.2 mm
- Infill: 15%
- Supports: Not required
- Material: PETG (PETG recommended for higher temperature environments, inside of cars can get hot)
💡 Notes
- Designed for a snug fit — tolerances may vary slightly depending on your printer
- If using in a car, consider PETG or ABS for better heat resistance
- Openings allow access to USB ports and status LEDs
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)