Search models, users, collections, and posts

Air75 / Air75 II Battery Crash Protector PLA/PETG

IP Report

Print Profile(1)

All
A1
X1E
X1
H2D Pro
H2D
H2C
P1S
H2S
X1 Carbon
P2S
A1 mini
P1P
X2D
A2L

0.2mm layer, 1 walls, 5% infill
0.2mm layer, 1 walls, 5% infill
Designer
43 min
2 plates
4.0(1)

Open in Bambu Studio
Boost
19
41
1
0
33
25
Released 

Description

A crash-protection battery mount designed for Air75 and Air75 II whoop frames.

This mount helps protect your LiHV battery during crashes by keeping it elevated and shielded, reducing direct impact on the pack.

It has been tested on Air75 II and is designed to also fit the original Air75 frame, since both share the same 75mm layout.

 

🔋 Battery Compatibility
    •    Fits 480mAh and 580mAh batteries perfectly
    •    680mAh not tested yet

 

🔒 Fit & Installation
    •    Designed as a very snug fit to keep the battery secure
    •    You can use it without glue, but:
    •    Test the fit first
    •    Then optionally super glue it if you want maximum security

 

⚙️ Versions Included

There are 2 versions included:
    1.    With hole
    •    Easier battery removal (push from the bottom)
    •    Weight: ~1.99g


    2.    Without hole
    •    Weight: ~2.7g

 

🛡️ Safety & Clearance
    •    Does NOT touch or interfere with the AIO or electronics
    •    No pressure on wiring or components
    •    Fully safe for normal use

 

⚠️ Weight Note

Yes, it’s a bit on the heavier side for a tiny whoop.

If there’s enough interest, I’ll work on a lighter revision while trying to keep the same strength and protection.

 

Compatibility:

Designed around the Air75 II, but should also work with the original Air75 due to similar dimensions.
Fit may vary slightly depending on frame tolerances.

 

If you try it, let me know how it fits, especially with different battery sizes or on the original Air75.

Comment & Rating (1)

(0/1000)

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.