Magnet Fishing Duck Game & Memory 2 in 1 No AMS

Magnet Fishing Duck Game & Memory 2 in 1

Hello everyone, today I want to show you my latest creation, a board game. Since I haven't seen anything like it here yet and I really liked the idea behind it, I thought I'd build something like this. The game has 2 games in one: the first is pure magnet fishing and the second is classic Memory, for which numbers are stamped under each duck, as seen in the picture above. You can, of course, combine both game types as you wish

No AMS is required, all parts were designed in Fusion 360 so that they can be printed individually and are compatible with all Bambu series printers

Assembly Instructions

The assembly is relatively simple

Step 1: Connect parts with pins (glue)

Step 2: Insert the blue parts (These are printed upside down, so at the end, assuming you use the textured plate, you get a beautiful pattern (Glue)

Step 3: Install the decorations, the green pins only need to be inserted into the holes. The yellow blossoms must be glued onto the green leaves

the green leaves (do not glue, as new base plates with new game modes might be released in the future)

For the ducks, there are 2 print versions please note this: version 1 is with magnets, version 2 is without, only with numbers on the underside, so please pay close attention

Version 1: For the magnet version, a pause is built in during printing where the magnets are inserted (if you have a steel nozzle, the magnets will stick with a little glue), with a copper nozzle, this step can be skipped (but is not recommended)

5x3mm magnets were used as magnets, here is a link from Amazon for the ones I used: https://www.amazon.de/dp/B097MJLY51?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1

Version 2: Here, only the numbers on the underside are printed, and the game only includes the Memory function

For the fishing rod, 3 magnets are built into the lower part and a piece of string is used as the line, relatively self-explanatory

Always pay attention to the correct insertion direction when inserting the magnets, both for the ducks and for the fishing rod)

The ducks were created with the help of the PrintMon Creator, the pond and everything around it was built by myself in Fusion 360

Now I wish you a lot of fun building it, I would be happy about likes and boosts