Minecraft Allay Fidget Clicker
Print Profile(1)
Bill of Materials
Description
Minecraft Allay Fidget Clicker
This model is free - and clicky!
This model prints on 3 plates for those without an AMS. One for the main body, one for the wings and head, and another for the eyes.
Make sure the supports are enabled and print as the file suggests. For the body piece, you will need to manually add a pause and change with filament colours at layer 24 if you don't have an AMS.
You will need to supply your own mechanical keyboard switch for this model to operate as pictured.
Depending on the type of key switch you have, a small amount of glue may be required to hold the keycap onto the switch. The base will hold all types of switches without the need for glue. If you reside in Australia, you can purchase some key switches here and help support local creators: https://buymeacoffee.com/clickkey/extras
You may need glue to build the allay fidget. Assembly is as follows:
- Remove the support material from the body piece.
- Push the two wings into the bottom body. Make sure the correct wing goes into the correct slot. Glue may be required for this.
- Push the top of the keyboard switch into the body piece. This will be tight. Glue may be required for this step.
- Build the head by pushing the two eyes into the head. Both eyes fit either hole. Glue may be required for this.
Attach the head to the keyboard switch attached to the body. Glue may be required for this step.
If there are issues, please comment down further or send through a message directly.
Boost Me (for free)
You can check out all the other print-in-pieces designs in my profile. If you like this one, consider giving me a Boost so that I can continue to create great designs.
This model is a type of fan art.
If you like this model, check out all fidget clickers designed by ClickKey here:
https://makerworld.com/en/collections/21018615-fidget-clickers
Take a look at this Minecraft Chicken Fidget Clicker! https://makerworld.com/en/models/2577819-minecraft-chicken-fidget-clicker#profileId-2842774
Take a look at this Minecraft Enderman Head Fidget Clicker! https://makerworld.com/en/models/2668772-minecraft-enderman-head-fidget-clicker#profileId-2953588
You may also like this minecraft logo design. https://makerworld.com/en/models/2071104-minecraft-logo#profileId-2236966
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)