Outer Barrell, canna esterna M4

Outer Barrel for Airsoft replicas, suitable for inner barrels from 100mm to 130mm (and obviously longer). The peculiarity of this outer barrel is the absence of a 14mm threaded part, whether CW or CCW, where the flash hider or suppressor is screwed in. Instead, it features an 11mm CW internal thread for mounting suppressor adapters from Glock replicas. This choice is due to the part's inherent strength, as it allows for an outer barrel printed with simple PLA, without having to worry that the 14mm threaded part, which is thinner than the rest of the outer barrel, might break after an impact. Another peculiarity is the absence of a cutout for battery cables. This ensures a uniform outer barrel, with a full impact plate and a more resistant T-Hop-up housing. Obviously, this modification means that this outer barrel can only be mounted on replicas with rear wiring, but it is always possible to modify it to suit your needs. I recommend printing it with the thread facing the build plate and ensuring that support generation and brim are active for maximum bed adhesion. If you liked my work, follow me, like the project, and if you want, give me a Boost, thank you