Search models, users, collections, and posts

SCX30 Bead Lock Wheel 0.72

IP Report

Print Profile(1)

All
P1S
P1P
X1E
H2C
P2S
X1 Carbon
H2D
H2S
X1
A1
A1 mini
H2D Pro
X2D
A2L

0.12mm layer, 2 walls, 15% infill
0.12mm layer, 2 walls, 15% infill
Designer
2.8 h
1 plate

Open in Bambu Studio
Boost
10
32
1
0
9
7
Released 

Description

Dual Locking Ring Beadlock Wheel – SCX30 | 0.7" Tire

A scale-looking dual beadlock wheel designed specifically for the SCX30, featuring both an inner and outer locking ring for a realistic, aggressive appearance.

Design Details

The inner and outer rings are intentionally different. The inner ring is designed with extra clearance to fit around axle weights, wheel weights, and similar accessories. The outer ring features additional detail work for a cleaner, more polished look. Not every bolt is required to hold the wheel securely — six bolts on each ring is plenty — but running all 12 gives you that full scale beadlock look. Mix and match to suit your style.

The offset has been matched as closely as possible to the factory SCX30 wheel, so the inner edge sits in the same position as stock. This is a wider wheel than factory at approximately 10mm total width, designed to accommodate larger tire diameter.

This is a remix-friendly design — feel free to modify, rescale, or make it your own.

Specs

MeasurementInchesMetric
Wheel (rim) diameter0.72"18.3mm
Inner rim width0.39"9.9mm
Inside width between lock rings0.41"10.4mm
Total wheel width (outside lock ring to outside lock ring)0.524"13.3mm
Inner ring clearance diameter0.575"14.6mm
Back of wheel to back of lock ring0.158"4.0mm
Wheel seat to inner edge of lock ring0.101"2.6mm
Hub/axle face to inner edge of back lock ring0.181"4.6mm

Tire Compatibility

Designed around RC4WD 0.7" tires. Most 0.7" tires should fit, but results may vary with other brands — try it and see.

Recommended Hardware

M1.4 x 5mm Socket Cap Screws (Hex Drive, Stainless Steel, Full Thread) Search Amazon

 

Boost Me (for free)

"If this wheel ended up on your rig, I'd love to see it — drop a photo in the comments! If it saved you some design time or just looks good on your shelf, a boost helps more people find it. I love building and sharing designs with this community — every boost genuinely means something. Thanks for checking it out! — Invincible Jeep Guy"

Comment & Rating (1)

(0/1000)