Search models, users, collections, and posts
Valeo parking sensor hole adapter 19 to 22 mm
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
16 min
1 plate
Open in Bambu Studio
Boost
2
7
0
0
12
12
Released
Bill of Materials
Bambu Filaments
Select all
Description
Valeo Parking Sensor Adapter (19mm to 22mm)
This practical adapter allows you to install standard 19mm Valeo parking sensors into bumper holes with a 22mm diameter. It is the perfect solution if you have a bumper with larger pre-drilled holes or if you are replacing oversized factory sensors with a Valeo aftermarket kit.
Key Features:
- Precision Fit: Reduces the hole diameter from 22mm to 19mm, ensuring a snug and secure sensor fit.
- Flush Finish: The integrated lip covers the bumper hole edges for a clean, professional "OEM" look.
- Snap-in Design: Features small locking tabs to keep the adapter firmly in place within the bumper.
Print Recommendations:
- Material: ASA, ABS or PETG. These are highly recommended for their weather resistance, UV stability, and ability to withstand high temperatures (bumpers get very hot in the sun). PLA is not suitable for automotive exterior use.
- Orientation: Print with the flange/lip facing down for the best visible surface finish.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)