Bump Stop - easy installation - TPU
Print Profile(3)
Description
This is my modular version of a bump stop that works as an additional bumper for especially car suspensions if the dive in is too far in some instances.
This is a TPU Print because only with TPU this would work.
Installation is easy: bend the tpu-bumpstop slightly and ring it arround your shock rod, you can stack them if you need to - they are available in 19mm, 23mm and 26mm for various diameters. You can also decrease or increase the size of the model in your slicer for your personal needs or just tell me if you need a smaller/bigger version.
This bumpstop can also be installed afterwards, no need to disassemble your coils, just bend it and the lock mechanism on the bigger one will apply. you can also use the holes and pins 180° twisted to get them interlocked!
TPU 95A and 100% infill recommended
print slow as always and search for the bambulab official TPU guide for your printer
There is also a standalone-version with 10mm available in various diameters.
If you have any questions, feel free to contact me!
thank you for a like, share or boost :)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)