Mean Well LRS-150 Case

🔧 Hardware needed

• Mean Well 150W power supply
• Aliexpress switch (ON/OFF)
• M4 Female banana sockets
• Cable gland

• Screws:         2pcs M3x8 countersunk 

                         4pcs M4x10 countersunk

                         1pcs M4x6 TCE

🖨 Print settings

• Material: PLA or PETG (PETG recommended for better heat resistance)
• Layer height: 0.2 mm
• Infill: 20/30%
• Walls: 5 perimeters

Important (to avoid warping):

• Use a brim
• Set the first layers to 30 mm/s
• Alternatively, use glue stick on the bed

Supports only if needed, depending on orientation and printer calibration.