MK23 CARABINE KIT REMAKE (TM/STTI/Novristch)
Print Profile(1)
Description
DISCLAIMER: This kit is based on dinhan2 model of the MK23 carabine kit. Although the model is listed as ND, the author gave me express permision to modify the model as will. Obviously recommend to look out his profile on cults!
Hello guys! Finally I can upload a remake version for the MK23 of the model of dinhan2. AS you can see on images, the model has been heavily modified, been the main things:
1.- The overall length has been cut to allow it to be printed in the PS2 buildplate. Before it was so huge that was needed atleast a 300x300mm bed.
2.- The exterior look has been overall improved, adding true MLOCK sistem on the front, a picatinny rail underneath and some body modification to make it look better.
HARDWARE NEEDED:
2x M3x40mm screw
2x M3 threaded insert
1x M6x40mm pin (it can be replaced by an M6x45 screw -you might need to short it- and M6 nut)
ATENTION: To print the main part, it is necessary to place the piece in a specific diagonal position. This position can cause some printing failures because it is not a natural printing position. We recommend using a large-format printer to print without problems. We have printed varios models in this position and haven't had much trouble.
Boost Me (for free)
If you like our work, LEAVE A BOOST! It helps a lot!
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)