Brasil Futebol Spinning Key Chain
Print Profile(2)
Description
Boost Me (for free)
Creating and printing 3D models is one of my favorite hobbies. If you like this model, found it useful or just want to help out you can support me with a boost! Thank you and enjoy!
V2 Spinning Keychains now available!
This updated model prints faster with better definition and no brim lines!
I suggest using a flat/smooth printing plate so the bottom of the balls are as flat as possible.
If you print with a textured plate you may want to sand the bottoms smooth for a better fit.
Assembly Instructions:
These print in halves with a small connector to join the 2 pieces together.
Print each half, the keychain ring and the connector. Remove the small supports under each ball half.
Insert the connector in one of the halves, then align the pieces together so they match.
If assembled incorrectly you can pull the 2 pieces apart or use a flat head screwdriver to gently pry them part.
- Once the ball is assembled, firmly squeeze the sides of the ring and slide the pointy ends of the ball into the holes on the top and bottom.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)