Tiger H1 - Panzerkampfwagen VI Ausführung H1

It's a Tiger H1 display miniature with a turning turret. To be as perfevt as in pictures you must use high quality slicer settings such as 0.08mm layer height. I have added a brim wherever is needed in the 3MF file. Attention! The current orientation of the parts in the 3MF file is important especialy in plate 2 where the side flaps need to have this specific order of placement, so do not change it. Also, there are many tiny pieces in the plate 1, please be extra careful in the whole proccess. I prefered white PLA and if you want you can spray primer if you want and then paint. The tracks must be printed with glue on the bed for the best adhesion and be careful at the pull of or you can brake the tracks. Instead use a scrapper. Connect the track's last and first part with superglue. If it's too loose brake a piece from each track and it will be fine. If you also want, you can add some armor tracks on the side of the turret of in the front transmition section. If not, delete plate 4. 

Tip: For better support removal you can adjust the top z distance depending on your printer.

For Creality printers: 0.29mm

For Bambu printers: 0.25mm

Only one extra part needed: a piece of metal paper clip with a length of 35mm to insert in the turret - gun connection. 

For further details please feel free to leave a comment and be sure I'll be there to answer any question and help your model be as fine as mine :) 

Happy Printing!