Tesla Charger Mount Double 4 Siding & Gen3 Charger

Tesla Charger Siding Mount for Double 4 Siding & Gen 3 Tesla Charger

This mount lets you securely install your Tesla Wall Connector (Gen 3) directly over standard US house siding without cutting or modifying the siding at all. It follows the exact profile of common 4" lap siding (the most common sizes in the US), so it sits flush and looks clean.

Print Recommendations

Material: ABS or ASA (highly recommended for outdoor UV and weather resistance)
Infill: Print as solid as possible
Layer height: 0.2 mm is perfect

Installation Note – Conduit Routing
If you decide to route the power conduit through the back of the charger (instead of the bottom entry or top), you will need to drill a hole through the back of this mount for the conduit to pass through. I drilled one on mine and it fits perfectly.

Real-World Testing:
I’ve had this mount installed on my own house for over a month now with no issues. The charger sits rock-solid, and the cable management still works.