HD Steel Shelf Accessory Holders

Well kids we are back at it.  Down the worm hole we go.  I'm to work through similar applications for my second shelf type that I'm sure some of you also have.  Got a few different applications going already, but If it doesn't fit let me know this one is pretty easy to scale for different sizes.

For even more accessories for steel rack storage please feel free to check out our entire collection here.

• Material
  • These are all designed around PETG (I used PETG-HF).  I don't recommend PLA for functional parts like these that bare a constant load as they are subject to creep (they will deform over time with constant load) in this condition. 
• Shelf this is designed around
  • Gorilla 4-Shelf HD Industrial Rack from Costco
    • This is the notch pattern it is designed around, as best I can measure it.  Pitch is about 68mm.
      • 
    • I think it will also work on this rack but haven't tested it.
    • There may be some other racks it works with, just not sure.
• Current Configs (actual size is ∅+2mm to keep a loose fit) and what I know fits in them:
  • Open Bottom & Closed Bottom
    • 
      • ∅50mm
      • ∅55mm
      • ∅60mm
      • ∅65mm 
        • Aquanet Hairspray bottles
        • Soda cans
      • ∅70mm
      • ∅75mm
      • ∅80mm
        • Takeya 0.7L - 24oz water bottles
        • Contigo
      • ∅85mm
      • ∅90mm
      • ∅95mm
        • Takeya 1L - 32oz water bottles
        • Nalgene 1L - 32oz water bottles
      • ∅100mm
  • Coffee Cup Holder (each has 3 different orientations depending on how you want to mount it and have the handle come out)
    • 
      • ∅80mm
      • ∅85mm
      • ∅90mm
      • ∅95mm
      • ∅100mm
      • ∅105mm
      • ∅110mm
  • Support brackets
    • 
    • I designed these around the idea of supporting longer objects.  You could use them support a shipping tube with a cap on it for things like welding rod or make a small trash can out of it.  You can also just support smaller things that are top heavy.  I'm using one to support a propane torch that is kinda long just to protect it.  Let me know what other ideas you come up with. 
      • ∅50mm
      • ∅55mm
      • ∅60mm
      • ∅65mm 
      • ∅70mm
      • ∅75mm
      • ∅80mm
      • ∅85mm
      • ∅90mm
      • ∅95mm
      • ∅100mm
• Assembly
  1. No tools required here.  Start by hanging the Left (L) and Right (R) dovetail hangers in the rack.

     1. 

  2. Take your holder and align the groves on the bottom to the top of the dovetail hangers.

     1. 

  3. Once aligned push it all the way down till it clicks in.  It should have a mm or 2 of wiggle to move up and down but shouldn't come off easy.

     1. 

• Disassembly
  1. Tip the holder forward a little bit, basically just enough for the nubs on the back to clear and start to pull up and off.  It might take the dovetail hangers with it, but it's not the end of the world.