Bag Feet and backing plates

These feet were designed to be added to a custom duffel bag (specifically the Stephan Duffel Bag by Linds Handmade). I was inspired by bag feet I could purchase online, but they were only sold in packs of 4 and I wanted to use 5 feet for my bag.

These were designed to be used with #8 screws. I added a layer of peltex between the fabric and the backing plate for added depth. The screws I used were ½ inch long. If I didn't add the peltex, you would see the point of the screw when I attached it.

I HIGHLY RECOMMEND doing a test run on a scrap piece of fabric before adding to your own bag. Make sure it works to your satisfaction.  You can always add an acceptable glue to the holes before securing to be certain they don't loosen up over time.

I used PETG HF when making these feet and I was very happy with the results.