Universal Security Camera Junction Box

Short notice for the top of the description

Important: Printing, modifying, installing, and using this model is entirely at the user’s own risk. The installer and user are solely responsible for verifying that the model is suitable for the intended application and complies with all applicable laws, regulations, codes, standards, and safety requirements in the country and location of installation. To the maximum extent permitted by applicable law, I accept no liability for any damage, injury, loss, failure, or other consequences arising from the use, installation, modification, or misuse of this model.

Hello, I designed this junction box to be as universal and adaptable as possible for a wide range of cameras and brands currently available on the market. The different versions are made so that users can choose the most suitable option for the camera they need to install.

The following diameters are available:

• 95 mm
• 110 mm
• 120 mm
• 130 mm
• 170 mm

I organized the individual STL files into folders for easier navigation.

Model advantages:
The first advantage is that both the model and the gasket include retaining features that help keep the gasket in place and reduce the chance of it falling out during installation.

The second advantage is that there are two types of top cover.
The first version is designed to use a gasket, which must be cut so that the cable can be passed through it.
The second version is fully solid, without a pre-made hole, so the user can drill the opening exactly according to their own needs.

The base includes a designated area for drilling a hole for a cable gland. I intentionally did not include the hole directly in the model, because there are many different types of cable glands and each user may need a different size depending on the cable and the required diameter.

Printing:
For printing, I recommend using at least ASA due to its better heat resistance and outdoor weather resistance.

The area intended for the cable gland should be printed with 100% infill.
If printing the top cover version with a gasket, I recommend printing the gasket part with 100% infill and using supports for both the cover and the gasket.

Assembly:
First, drill the hole for the cable gland and install the cable gland itself.

Then mount the box in the desired location. Depending on the selected top cover version, you will either need to insert and cut the gasket so the cable can pass through it, or drill an opening into the solid cover.

After routing the cables into the box and connecting the camera, screw the cover onto the base. Finally, attach the camera to the cover using screws.

Materials:

• 3× M6 heat insert
• 3× M6 × 20 mm screw
• ASA filament
• flexible filament

DISCLAIMER – READ BEFORE USE
This model is provided for informational and hobby purposes only, without any express or implied warranty of any kind, including but not limited to any warranty of merchantability, fitness for a particular purpose, weather resistance, water resistance, safety, durability, performance, or compliance with any specific law, regulation, code, standard, or technical requirement.

Printing, modifying, installing, and using this model is entirely at the sole risk of the person who prints, modifies, installs, distributes, or uses it. Every user is solely responsible for independently verifying that this model is suitable for the intended application and that its use, installation, and any related hardware, materials, fasteners, sealing methods, electrical work, and mounting methods comply with all applicable local, national, and international laws, regulations, building codes, electrical codes, standards, and safety requirements in the country and place of installation.

The user assumes full responsibility for material selection, print quality, printer settings, structural integrity, environmental resistance, mounting security, cable protection, sealing performance, inspection, maintenance, and overall installation safety.

This model is not a certified product and is not intended for use in any application where failure could result in injury, death, property damage, electrical hazard, code violations, or any other safety-critical consequence. Where required by law, regulation, or applicable technical standards, installation must be carried out, inspected, or approved by a qualified professional.

To the maximum extent permitted by applicable law, I disclaim any and all liability for any direct, indirect, incidental, consequential, special, exemplary, or punitive damages, losses, costs, claims, liabilities, defects, failures, malfunctions, injuries, property damage, economic loss, or any other consequences arising out of or related to the download, printing, modification, sharing, installation, mounting, or use of this model, whether caused by negligence, misuse, improper installation, environmental conditions, incompatibility, print defects, material failure, or otherwise.

By downloading, printing, modifying, sharing, installing, or using this model, the user acknowledges and agrees that they do so voluntarily, entirely at their own risk, and under their own sole responsibility.

This disclaimer applies only to the fullest extent permitted by applicable law and does not exclude or limit any liability that cannot legally be excluded or limited under mandatory law.