Erechtheion Model (Erechtheion) - Scale 1:200

1:200 scale model of one of the most striking archaeological buildings on the Acropolis of Athens. From the cover photo, its integration into the context, also 3D Printed, is visible, given the specific needs. The filament type used is white PLA Matte to ensure an exterior finish as similar to plaster as possible.
The entire model and all its complementary elements were printed using a layer height of 0.16mm (for the caryatids, it is recommended to print at 0.10mm) and activating ironing for the top surfaces, in order to ensure a better exterior finish. The infill was reduced to 10% and set to 'aligned rectilinear' for two reasons: to save material and because high resistance is not required.

Within the print profile in Bambu Studio, there are three print plates:
1)  Contains the main body of the building, 0.16mm layer, active tree supports (for printing the entablatures)

2)  Complementary elements such as capitals and more projecting entablatures, 0.16mm layer, active supports (recommended but not essential)
3)  Caryatids, 0.10mm layer (modified in ''Advanced → Object/Part Settings''), supports deactivated to ensure easy removal from the plate