Jiabaile Hilux

A TOYOTA Hilux body for the 3601 Jiabaile 1/36 scale rc crawler. These trucks were everywhere for me growing up and I worked in or on one for as long as I can remember. Famously rugged and unkillable on Top Gear now much smaller for your desktop. 

No modifications needed other than the clip on magnetic mounts. This will fit car is without moving any of the board components.

I do recommend taking a dremmel to the wheel wells to open them up a bit once you have mounted the truck body. There is some rubbing but with a little bit of sanding there is plenty of clearance. 

Magnetic Mounts

https://makerworld.com/en/models/2310832-magnetic-body-mounts-for-jiabaile-3601#profileId-2522741

This prints in 2 parts. The body and the toolbox. Depending how you want to mount it you can get creative, I have designed magnetic mounts as well so its easier to swap bodies out. A little bit of hotglue on the magnets has worked great for me as its forgiving and allows me to move them should I get it off center. Enjoy and remix as much as you like. 

The 3rd plate does not need to be printed as its a slightly tighter tolerance on the wheel wells