The Joker
Print Profile(1)
Description
Project: Joker.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#8c69b5 PLA Overture Matte Purple Transmission Distance: 0.7
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#eb3b41 PLA Overture Matte Red Transmission Distance: 2.5
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Purple
At layer #13 (1.12mm) swap to BambuLab Green
At layer #17 (1.44mm) swap to Red
At layer #23 (1.92mm) swap to White for the rest.
If you are only able to do 4 color then just add a pause at layer 23 instead and manually switch the real
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)