Deadshotpaintestudio

cover

IMG_20260116_115213.jpg

1000480941.jpg

1000480939.jpg

1000480943.jpg

1000480942.jpg

plate_1.png

7c2d771df0e23e20.png

1000480948.jpg

1000480944.jpg

1000480947.jpg

1000480950.jpg

1000480949.jpg

1000480952.jpg

boquilla 0,4   pero con 0 ,2 sale mas fino  y muy detallado con velocidad de soporte muy baja para mejor calidad  dejo en las fotos la que yo eh usado filamento mejor  un texturizado da muy buen resultado relleno yo  lo hice con un 15%  pero se puede hacer con menos aumentado las paredes y relleno giroide dejo fotos de la velocidad y configuración de soportes&nbsp;&nbsp;I used a 0.4 nozzle, but a 0.2 produces a finer and more detailed result.

I used a very low support speed for better quality; the settings I used are shown in the photos.

For filament, a textured finish gives very good results.

I used 15% infill, but you can use less by increasing the wall thickness and using gyroid infill. I&#39;ve included photos of the speed and support settings.

A 0.4 nozzle, but with 0.2, it comes out finer and very detailed.With very low support speed for better quality; I've included the settings I used in the photos.For filament, a textured one gives very good results.I used 15% infill, but you can use less by increasing the walls and using gyroid infill. I've included photos of the speed and support settings.&nbsp;&nbsp;I used a 0.4 nozzle, but a 0.2 produces a finer and more detailed result.

I used a very low support speed for better quality; the settings I used are shown in the photos.

For filament, a textured finish gives very good results.

I used 15% infill, but you can use less by increasing the wall thickness and using gyroid infill. I&#39;ve included photos of the speed and support settings.

0.08mm layer, 3 walls, 5% infill

hola aquí le dejo el primer modelo la ia me dio una base pero esta trabajado y muy retocado en blender  se le echo muchas horas para que quedara un modelo muy chulo de vegeta ssj4 que no lo eh visto en ningún lado espero que lo disfruten y lo impriman mucho el mejor material para hacerlo es los texturizados  a o los   silk+ sobre todo el gris

Hello, here is the first model. The AI gave me a base, but it has been worked on and heavily retouched in Blender. Many hours were spent to create a very cool SSJ4 Vegeta model that I haven't seen anywhere else. I hope you enjoy it and print it a lot. The best material for it is textured or silk+ filament, especially gray.

Dragon Ball Vegeta SSJ4

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models