Slip Cover hide a post

Not a fan of the metal T post on the outside of my retaining wall so I created a wood grain cover that can be adapted for various sizes. 

print a top piece and 2 sides pieces ( left and right) print the adapter plate and either a 10 inch or 4 inch post cover. You'll need one knob and one pin as well.

Push the pin through the alignment plate. Place a ¼ inch piece of filament in the center of the 4 way split on the pin and then press it into the knob.

place the top piece and left/right rails on the alignment tool. place over the post where you want it. (alignment tool has a place for the left/right rails for shorter covers too.

use the holes on the alignment plate for your drill bit to drill your marks. remove the top and side rails from the alignment tool and press your screws through the holes. 

drill the guides and side rails into your wall using the drilled marks and then slide your cover into place.

I hope you like it. Please give a follow, leave a rating and comment with pics. if you like my models I would appreciate a BOOST if youve got them.