Toggle Switch Housing for BLV AMS Riser v4

Add manual control to your BLV AMS Riser v4 LED lighting with this simple housing designed for the KCD1 Mini Round Toggle Switch (SPST 2-Pin). This mount slides directly into the modular side panel slots—no screws, no heat-set inserts, just snap it in and you're done.

The Problem It Solves: When you add LED strips to your BLV Riser and wire them to your printer's power supply, they turn on automatically with every print. This housing lets you add a manual toggle switch so you control when your lights are on, perfect for overnight prints or when you simply don't need the extra illumination.

Key Features:

• Tool-Free Installation: Simply slides into the BLV Riser v4 modular panel slot and locks in place
• Perfect Fit: Designed specifically for the KCD1-5-101-C-5 mini round toggle switch (6A@250V / 10A@125V)
• Pre-wired Compatibility: Accommodates the switch's pre-attached wire leads for easy routing
• Clean Design: Maintains the sleek aesthetic of the BLV Riser while adding functional control

Compatible Switch: KCD1 Mini Round Toggle Switch SPST 2Pin (commonly available on Amazon - search B0DWJVPQFZ)

What You'll Need:

• 1x KCD1 Mini Round Toggle Switch with pre-wired leads
• Your printed housing

Installation:

1. Insert the toggle switch into the housing from the front
2. Route the wire leads through the back opening
3. Wire the switch inline with your LED strip's positive (+) wire
4. Slide the housing into any BLV Riser v4 modular panel slot

Print Settings:

• Material: PLA, PETG, or ABS (I only printed it in PLA)
• Layer Height: 0.2mm
• Infill: 10%
• Supports: Turn on supports

Other Applications: While designed for LED control, this switch housing works great for:

• Filament dryer control
• Fan power switching
• Any 12V DC accessory control (up to 10A at 125V)

Credits: Original BLV AMS Riser v4 by benlevi