Passat Wheel Center Cap (61 mm) – OEM Style Text

This model is a wheel center cap designed for Volkswagen Passat rims, featuring the “Passat” lettering in a style matching the original font. The text is printed facing down on the first layer, resulting in a very clean and sharp finish when using a textured build plate.

• Outer diameter: 61 mm
• Designed for snug fit in standard center cap slots (verify before printing)
• “Passat” text is on the bottom (first layer) for best visual quality

Print Settings (important):
To get the best visual result:

• Enable “Only one wall on first layer” – improves the appearance of the text on the first layer
• Reduce print speeds for all features except infill (helps with clean details)
• Print text side down on the build plate
• A carbon fiber / textured print plate gives a nice finish

Material:

• Printed with PLA

Notes / Tips:

• Measure your original cap before printing – tolerances can vary between wheels
• If the fit is too tight, scale down slightly (e.g. 99–99.5%)
• Clean build plate is important since the visible surface is the first layer