Stork Ultrasound Photo Holder – Baby Announcement - Free 3D Print Model

Search models, users, collections, and posts

OptimussMaximuss

Household>Decor

IP Report

Print Profile(3)

All

P1S

X1 Carbon

X1E

H2C

H2D

P2S

H2S

H2D Pro

P1P

X2D

A2L

A1 mini

0.28mm layer, 2 walls, 15% infill

Designer

2.2 h

1 plate

4.8(14)

Adapted Backcover 0.28mm layer, 2 walls, 15% infill

19 min

1 plate

5.0(4)

Coloured, 70% size, 0.2mm layer, 3 walls, 15% infill

1.4 h

1 plate

Open in Bambu Studio

Boost

506

1615

411

246

Released

Description

Hello there, I am George. Ive liked 3d printing for quite some while, but lately ive started doing som lil' 3d modeling.

ATTENTION: i have made a mistake and somehow changed the size of the circle. resize accordingly:
if the swan is 10 mm thick, you shall have a 5mm thicc circle. asuming you sacle it uniformly.

English Description:
Celebrate the exciting journey to parenthood with this elegant stork ultrasound photo holder. Designed with a minimalist stork silhouette carrying a teardrop-shaped bundle, this piece features a circular opening where parents can place an ultrasound image of their baby.

Perfect as a pregnancy announcement prop, nursery decoration, baby shower gift, or keepsake for expecting parents, this design adds a sentimental touch to any room. The clean and modern style makes it suitable for both boys and girls, fitting beautifully into any nursery theme.

Romanian Description:
Sărbătorește începutul unei noi aventuri cu acest suport elegant pentru ecografie în formă de barză. Designul minimalist prezintă o barză care poartă un săculeț în formă de lacrimă, prevăzut cu un spațiu circular unde părinții pot introduce fotografia ecografiei copilului.

Este ideal ca decor pentru anunțarea sarcinii, cadou pentru baby shower, decor pentru camera copilului sau amintire specială pentru viitorii părinți. Stilul simplu și modern îl face potrivit atât pentru băieți, cât și pentru fete, integrându-se ușor în orice tip de decor.

If you like it, id highly appreciate some downloads and maybe a boost too, i dont mind that at all;)

Comment & Rating (32)

@3Dfans

Printed it straight out the app. Like the initial design, but i see some flaws. (some due to my not so clean buildplate. But the circle that goes behind the picture is way too big. Does not fit. That's also shown in the preview. But that should be fixable.

The designer has replied

@Maximusss

Thank you for the feedback. I always print my models befor posting, mine fits perfectly. perhaps i did change the scale to the circle by mistake before i uploaded. i dont know if there is a way for me to fix it without uploading the whole model again, but ill look into it.

@Maximusss

I cant replace the file. But the circle should be half the thicknes of the stork. if the stork is 10 mm, the circle should be 5 mm and it should fit snugly assuming you scaled it uniform, on al axis

@3Dfans

Check. Strange thing is that the with of the circle is half of the stork. 5 mm. Diameter is 80.7. While the hole it should fit is 69,6 mm. So a Hammer would't even make it fit 😂

@Ne54rD

Great design and very easy to print. The model came out clean, with smooth details and a nice final look. Thank you for sharing this beautiful design!

The designer has replied

@Maximusss

I trully approeciate your comment. i want to say thank you from the bottom of my heart for it and i am verry happy u liked it

@user_856605197

Print Profile

Adapted Backcover 0.28mm layer, 2 walls, 15% infill

Nice print! I heated up the bottom plate so the stork could fit into the stand. It's a tight fit but works! Can't wait to give to my daughter-in-law!

@mah.bodega

very beautiful, is it possible to commercialize the printed product

The designer has replied

Show original

@Maximusss

It can be sold for a small fee. You can find the link to Patreon in my bio where you can pay the small fee

Show original

@user_837234550

I wanted to know if this file can be sold or not

The designer has replied

Show original

@Maximusss

It can be sold for a small fee. You can find the link to Patreon in my bio where you can pay the small fee

Show original

@user_1631175156

is the circle supposed to be glued to the back after you put a picture in the frame?

The designer has replied

@Maximusss

so there was a slight mistake in the design. One circle is larger, so yea tou could glue it on the back. But someone posted a remix of the circle and fixed the problem. With the smaller circle you should be able to pressure fit it in the hole if your printer settings are ok

@Der__Jens

Print Profile

0.28mm layer, 2 walls, 15% infill

Nice model!

Show original

@Balboas1987

Print Profile

0.28mm layer, 2 walls, 15% infill

for those who like to surprise moms and dads at the gender reveal party, here is a pretty good idea

Show original

@user_390970984

Print Profile

Adapted Backcover 0.28mm layer, 2 walls, 15% infill

Brilliant just what I needed

@TXMarine

Printed nicely except for the xlarge circle

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.