Komorebi Glow Bookmark Set

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Komorebi Glow: Inspired by the Japanese word for light filtering through trees, highlighting that "glowing" effect on the blossoms and maidens. The monochromatic palette creates a sense of stoic beauty, making the sudden, fiery bursts of red feel less like a color and more like a heartbeat. These bookmarks will bring an elegance to your pages.

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 4.6

PLA BambuLab Basic Red Transmission Distance: 4

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer (0.84mm) swap to Jade White

At layer (1.16mm) swap to Red for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print.

Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections