RC Station for iSDT FD-200 / SP2417 dual

Here is the perfect RC Station, suitable for two iSDT FD-200 dischargers, two iSDT SP2417 power supplies, or one of each device

In addition to the two dischargers/power supplies, it also offers space for two batteries, which can be stored safely and securely in standard LiPo-Bags during the discharging process. Alternatively, the corresponding drawers can of course also be used to store cables/adapters, which makes sense in combination with the power supply. In addition, there is a 1x4 Gridfinity grid on the back for holding individual Gridfinity containers (numerous models can be found in MakerWorld). This allows all necessary (charging) cables, adapters, protective caps, etc., to be stored in place. Furthermore, sufficient ventilation is provided. On the underside, there are also recesses for rubber feet / felt glides (as desired). The station is compatible with my drawers and risers

Notes:

Please remove the rubber feet / gliding elements from the underside of the discharger/power supply before inserting to ensure a secure fit in the station

Please measure the case width of the FD-200 or SP2417 before printing. There are cases with both 63mm and 63.7mm widths. A print profile is provided for each dimension

Print Plate 1: Case width 63mm on both sides

Print Plate 2: Case width 63.7mm on both sides

Print Plate 3: Case width 63.7mm left, 63mm right

Print Plate 4: Case width 63.7mm right, 63mm left

Used LiPo Bags:

https://amzn.eu/d/04zKNUOD

More models from the RC area can be found here:

RC | Collection – MakerWorld: Download free 3D models

I appreciate suggestions for expansion (also for other chargers) as much as a short review. Feel free to write ideas in the comments