Nazgul Ringwraith Witch King of Angmar Bookmark

Want to sell physical prints of this design?
Become an officially licensed SkyLab 3D seller here: The SkyLab 3D | Patreon

Witch-King of Angmar – Dual Form Bookmark

This bookmark captures the haunting presence of the Witch-King of Angmar, depicted in both of his iconic forms—his wraith-like, unseen terror and his armored form on the battlefield. The vertical composition emphasizes the transition between the two, blending shadow and steel into a single, striking design.

The upper portion highlights the eerie, spectral nature of the Ringwraith, with sharp, ghostly details emerging from the darkness. As the design moves downward, the armored form takes shape, grounded and menacing, with intricate textures that translate beautifully through layered printing.

The high-contrast style was chosen to preserve detail while maintaining a clean, dramatic look in the final print. Despite the complexity of the artwork, the bookmark remains thin, durable, and fully functional.

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.57346mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #757575 PLA BambuLab Matte Nardo Gray  Transmission Distance: 0.7
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #d1d3d5 PLA BambuLab Basic Light Gray  Transmission Distance: 1.7
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Dark Gray
    At layer #15 (1.28mm) swap to Nardo Gray
    At layer #17 (1.44mm) swap to Ash Gray
    At layer #22 (1.84mm) swap to Blue Gray
    At layer #23 (1.92mm) swap to Light Gray for the rest.