Proboat Jetstream 1:6 Quick Release Battery Tray
Print Profile(1)
Description
This is a replacement SSL battery tray for the Proboat Jetstream 1/6 RC jet boat. The print profile includes individual plates for the following battery trays, but let me know if you need specific dimensions and I can try to make another print profile for it.
- Standard - for 138mm length batteries - this is a direct replacement to the factory Proboat battery tray (for hard case 3s or soft case 4s batteries)
- Tall 138mm - this tray shifts the battery fully behind the cockpit so that hard case 4s batteries will fit
- Extended 176mm - this is for those really long 4s soft case batteries. I made it specifically for an Ovonics 9000mah battery that I have.
All trays are for batteries with a width less than 48mm; I tested the fit with a Zeee 5200mah hard case 4s lipo which has dimensions of 138mm x 47mm x 48mm.
The tab that locks the tray in place needs to be glued into the tray after printing. The flat side of the tab should face the back of the boat.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)