Humperdink

cover

tempImageCZrDsG.jpg

plate_1.png

31f0e125c50a3fff.jpg

I printed with a .4mm nozzle in high detail and 4 walls. (3 or 2 would probably be the limit based on the size, but that would change if you use a smaller nozzle .)I also printed on the super tack plate so I didnt use a brim, but you might need to add a brim if you have trouble keeping the pins stuck to the plate.&nbsp;Once you have printed the drawers, you can print these pins. Insert the head of the pin into the handle sockets. They should press fit, but feel free to use glue as necessary. Then insert the drawer faces over the pins, again putting glue on the drawer face to mate to the drawers. Then glue the pieces to the drawers guided by the pins.  BE SURE YOU ALIGN THE FACES FIRST, there is an “up” to them which will prevent odd gaps between the drawer faces. Do a test fitting before with out glue.

0.08mm layer, 4 walls, 15% infill

Never Disarm

DIY Drawer with custom labels

I wanted to create pins for the originating drawers I found <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/113781-diy-drawer-with-custom-labels">here</a>. The original design requires you to use metal screws, but that seems unnecessary, so I made some pins to insert into the drawer handle holes which could be super glued instead of having to use specific screws.

Pins for drawers

ASIA

Print Profile(1)

Description

Comment & Rating (0)

This remix is based on

License

Related Models