BONBON Official 2.7inch Capsules | BCS 1.0 - Free 3D Print Model

Search models, users, collections, and posts

Pipin.World - 皮皮世界

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

A1 mini

H2D

H2S

P1S

X1E

H2D Pro

P2S

H2C

X1 Carbon

P1P

X2D

A2L

BONBON official 2.7 inch capsules | BCS.1

Designer

1.4 h

1 plate

4.8(19)

0.28mm layer, 4 walls, 0% infill - Full Plates - 256mm

11.8 h

4 plates

View the project

196

401

374

Released

Description

Next Generation Sand Sculpting Kit

Official BONBON 2.7 inch capsules.

simply print with default setting and pinch, twist support off to create your own. light weight yet strong capsules.

Printable Surprises At Your Finger Tip

candy

capsules

Comment & Rating (62)

@andrejrad

Once you close it, how do you open it without breaking it? Is there a trick to it?

(Edited)

The designer has replied

@pipin.world

I apply a slight squeezing pressure to get a better grip on the side that has an edge to grab hold to and then just open, which normally does the trick for me. I notice using PLA silk makes it more fragile. but the ball should be strong enough to bounce without breaking. How did yours break? at which location? maybe I can figure out the reason why.

@dandman

we had a couple loose the lip and one shattered when trying to pry it apart.

@andrejrad

Replying to @pipin.world :

Here are the pictures, but the same result as the previous answer above.

@michaelslai

Print Profile

BONBON official 2.7 inch capsules | BCS.1

Print with default settings, the circle effect is very good, gradient filament, the performance is also very good, the designer's own supports, easy to remove if you know the trick

Show original

@CuriousTh1ng

What filament is this one? it is really pretty

(Edited)

@Syphner

What is the trick in removing the support?

@homerunner55

Print Profile

BONBON official 2.7 inch capsules | BCS.1

Awesome - these worked great for me. Thinking about taking a stab at a threaded capsule remix, not sure how reliable that would be tho.

The profile uploader has replied

@pipin.world

I would save your time as the first few version of the capsules were actually threaded base, but for it to work efficiently it needs a much thicker wall etc. so this thinnest version is what won the evolution in the end. But a new kind is in the roadmap for a print in place joint, push to release mechanism. For me the focus needs to be maximum internal volume to house the most goods. so the balance seem to be shifting on each iterations.

(Edited)

@user_4027475556

Replying to @pipin.world :

My kids could not open the standard capsules without adult assistance, so a push to release or threaded version would be much appreciated.

(Edited)

@michaelslai

Why is there a pillar inside the ball when I print it? It's even in the slicer

The designer has replied

Show original

@pipin.world

This is a bracket, its function is to ensure that the projectile can be fully printed

Show original

@pipin.world

hi Michael, this is a custom support, which I designed. So the shape is quite special

Show original

@michaelslai

Thank you for your reply, I thought the supports were built-in, thank you for the author's effort, although it was a bit difficult to remove, it really ensured that the circle could be printed completely

Show original

@Syphner

i tried printing without the logo, my insides look like this. Does anyone have the same results?

@kashesq

Yes, I got the same result with Bambu's Matte PLA

@CATBUTLER

Hi everyone, first of all, many thanks to Pipin World. I think the dispenser is great. I have the problem that it doesn't properly traverse the curves for the capsules without a logo, as you can see in the picture. What am I doing wrong? I have already reduced the print speed for the inner walls, but without success

Show original

@Escarlath

It will have also the size of 2 inches? ☺️

The designer has replied

@pipin.world

Yes coming after. :)

@ChiefSquirrel

I've been testing with some 2" balls. The machine wants to vend multiple of them at a time. Not quite sure how to fix that yet.

@randomwow

when

@RDOG2204

How much capsules can I fit in one BONBON?

@Hankprints2234

i was able to fit 6 in with plenty of room to spare, so probably around to 10 capsules

@Upgrades

The print profile is no longer public

Better then the Originial with the Text on it :)

@lglinux79

The print profile is no longer public

Super profil ;)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.