RCBS Pro 2000 Compatible Plate Ring
Print Profile(1)
Description
This is a pretty fair modification from the original and I did this for a friend to try and help him get his press operational again. He was missing one of the springs too so those were replaced with paper clips as shown in the photo. I later added a fender washer and a split lock ring to those after the photo was taken. I used an M2.5x4 screw and I needed the washer and lock ring to take up some extra height as the back of the screw was coming through the insert. I used M2.5x2.5mm long brass inserts to hold the paper clips.
Also if anyone wants to modify this you can find the design files here: https://cad.onshape.com/documents/5639235cb4d0187c955d1184/w/105042c4c27a9be3c08af27d/e/e1bcc663d56311b5b4f92558?renderMode=0&uiState=69cadccf6309d44b1e71df08
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)