Modular Racing Track Set - 1:64 Scale Cars

Modular Racing Track Set - 1:64 Scale Cars

Hello everyone, I've put something together again, a complete race track including action modules. All components are printable without Bambu Lab AMS and other extras. There are many different track types, from straights to curves and seesaws etc. I have tried my best to show in the GIFs above how some of the modules look in action. All parts were tested by me with the car shown

Each print profile includes the corresponding connectors !!! / New print profile the connector is now also available individually.

With the single-lane bridge, some cars might experience problems

Here are some pictures showing how some parts are assembled for better understanding

Spinner Module

The module consists of 6 parts. The counterweights must be glued parallel to the other side, otherwise there could be an imbalance. A piece of filament is simply used as the axle, and finally the caps are placed on top or glued

Seesaw Module

The seesaw module is relatively simple. A piece of filament is also used as the axle and inserted into the designated recess, and if it should be too loose, lightly glue both ends

Finish Line

For the finish line, simply assemble the two gates and then insert them back into the designated recess (pay attention to orientation)

I designed supports that can be easily removed with pliers after the part cools down. All parts were made from PETG

If you have any further questions about the models, please feel free to ask. And if someone already knows the models and wonders why I uploaded them again with a new name, check various Facebook groups; the topic was discussed there