Super Mario Low Poly - (Monocolor)

Bring the world's most famous plumber to your desk with this Low Poly style design! This version of the model has been specifically optimized to be printed as a single piece (or in a few large blocks) and then hand-painted.

The low poly design, with its sharp, geometric facets, not only gives a modern and stylized look but is also ideal for painting: the defined lines of the polygons create natural boundaries for colors, making the process much simpler and more precise, even for beginners. Furthermore, the faceted surface effectively hides layer lines, ensuring a high-quality final result.

Technical Specifications and Printing Overview

• Difficulty: Medium (requires attention for supports).
• Supports: Yes, necessary. The use of "Tree" (or "Tree Hybrid") supports is highly recommended to support the arms, chin, hat brim, and protruding nose, minimizing contact with the visible surface.
• Recommended material: PLA (Grey, White, or Neutral are best as a base for painting).
• Infill: 10-15% (Gyroid or Grid for good solidity).
• Layer Height: 0.16mm or 0.20mm (thinner layers reduce the need for sanding but increase print time).
• Post-Processing (Cleaning): Once supports are removed, light sanding with fine sandpaper (400-600 grit) may be necessary at contact points for a perfect surface.

Painting Instructions

1. Primer: Carefully remove supports and clean the model. Apply a coat of spray primer (grey or white) to even out the surface and improve paint adhesion.
2. Base Colors: Use good quality acrylic paints. Follow the polygon lines to apply the base colors: red for the hat and shirt, blue for the overalls, brown for the shoes, etc.
3. Details: Use a fine brush for the "M" logo, mustache, eyes, and yellow buttons.
4. Finish (Optional): Once dry, apply a clear spray (matte or satin) to protect the paint and give a finished look.