百木昊

cover

IMG_20260328_222950.jpg

IMG_20260328_222959.jpg

IMG_20260328_223010.jpg

IMG_20260328_223022.jpg

IMG_20260328_223038.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

plate_13.png

我重新做了分件分色，使用分盘单色打印，然后进行少量的补色即可有不错的效果，如果想达到图中实例的效果，需使用0.02mm喷头，0.1mm以下的层高打印，不过耗时较长，或者自行放大打印，如果是用单色打印，2，3，4盘可以掠过

I re-made the part separation and color segmentation, using single plate single-color printing, then a small amount of touch-up coloring can achieve good results, if you want to achieve the effect shown in the example picture, you need to use a 0.02mm nozzle and print with a layer height below 0.1mm, however, this takes longer, or enlarge and print it yourself, if using single-color printing, plates 2, 3, and 4 can be skipped

0.2mm layer, 2 walls, 8% infill

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

<boostme><boosttitle>为我助力</boosttitle></boostme>做了分件分色，使用分盘单色打印，然后进行少量的补色即可有不错的效果，如果想达到图中实例的效果，需使用0.02mm喷头，0.1mm以下的层高打印，不过耗时较长，或者自行放大打印，如果是用单色打印，2，3，4盘可以掠过

<boostme><boosttitle>Boost Me</boosttitle></boostme>It has been separated into parts and colors. By using multiple plates for single-color printing, then a small amount of touch-up coloring will yield good results. If you want to achieve the effect shown in the example image, you need to use a 0.02mm nozzle and print with a layer height below 0.1mm, however, it takes a long time, or you can scale it up for printing. If printing in a single color, plates 2, 3, and 4 can be skipped.

One Piece Snake Princess Empress Boa Hancock

ASIA

Print Profile(2)

Description

Comment & Rating (10)

License

Related Models