Marco De Cia

cover

20260331_130433.jpg

WhatsApp Image 2026-03-30 at 15.01.06.jpeg

WhatsApp Image 2026-03-30 at 15.01.06 (2).jpeg

WhatsApp Image 2026-03-30 at 15.01.06 (1).jpeg

plate_1.png

79f2d38bb2e97b4c.jpeg

Stampa senza supporti100% infillAltezza layer 0,08 Nozzle 0,2

Print without supports100% infillLayer height 0.08Nozzle 0.2

0.2mm nozzle, 0.08mm layer, 5 walls, 100% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Questi tappi per i fori degli specchietti sono progettati per chi ha rimosso gli specchietti originali della propria Royal Enfield (es. Hunter 350, Interceptor, Continental GT, Himalayan, Classic) e vuole coprire il foro filettato sul manubrio con un tocco di stile. Il design include il logo integrato per una finitura pulita e professionale.&nbsp;✅ Testato con successo su Royal Enfield Hunter 350.&nbsp;⚠️ NOTA IMPORTANTE SULLA FILETTATURA: Il set è composto da due tappi con filettatura M10 con direzioni di avvitamento diverse, come richiesto dalla maggior parte dei modelli Royal Enfield:<ul><li>1x M10 Filettatura Destrorsa (Standard): Si avvita in senso orario.</li><li>1x M10 Filettatura Sinistrorsa (Inversa): Si avvita in senso antiorario. Verificate il verso dei fori sulla vostra moto prima dell&#39;installazione per evitare di danneggiare i filetti.&nbsp;Consigli di stampa:</li><li>Materiale: Si consiglia vivamente PETG, ASA o ABS. Il PLA non è adatto all&#39;uso esterno su moto poiché potrebbe deformarsi al sole.</li><li>Installazione: Avvitare esclusivamente a mano. Non usare attrezzi per evitare di danneggiare la plastica.</li></ul>

These mirror hole plugs are designed for those who have removed the original mirrors from their Royal Enfield (e.g., Hunter 350, Interceptor, Continental GT, Himalayan, Classic) and want to cover the threaded hole on the handlebars with a touch of style. The design includes an integrated logo for a clean and professional finish.&nbsp;✅ Successfully tested on Royal Enfield Hunter 350.&nbsp;⚠️ IMPORTANT NOTE ON THREADING: The set consists of two M10 threaded plugs with different tightening directions, as required by most Royal Enfield models:<ul><li>1x M10 Right-Hand Thread (Standard): Screws in clockwise.</li><li>1x M10 Left-Hand Thread (Reverse): Screws in counter-clockwise. Check the direction of the holes on your motorcycle before installation to avoid damaging the threads.&nbsp;Printing Tips:</li><li>Material: PETG, ASA, or ABS is strongly recommended. PLA is not suitable for outdoor use on motorcycles as it may deform in the sun.</li><li>Installation: Tighten by hand only. Do not use tools to avoid damaging the plastic.</li></ul>

Print Profile(1)

Bill of Materials

Description

Comment & Rating (0)

License