Cute Kawai Cat House - Fullsize Pet Home
Print Profile(4)
Description
A cute house in shape of a cute Kawai cat. The house is assembled via hex pins and dual compund resin (dont try to use superglue, you will have a bad time... ask me how I know)
The whole thing comes in 3 profiles:
The Base
The Walls
The Roof
Print them in that order and remember to mark off each plate once you print it, so you dont waste time.
My advice is to assemble the base and leave it to cure overnight. Then assemble the walls, a little resin glue and tape them together; insert the whole thing on to the base.
Same thing with the level two walls.
Finally, the roof assembly goes on top. there are no guide pins here, it was designed so the roof can be removed during hot summer months.
Detailed instructions are on the way, but before i do the whole guide; a couple of tips:
When applying resin or glue, apply it to the inner edge, so when you press them together it will leak only on the inside of the house. An alcohol wipe down will clean it just fine.
If you apply it to the center, it will leak outside and ruin the finish. Use a fastener, tape or carpentry vices to hold the pieces together while curing.
Boost Me (for free)
Bonus image, Maiko scootin:
If you want to support me, you can join my Patreon page to support me and sell physical prints of my models with a clear conscience :D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)