Knob Cap for Mercedes 190 2.3 or 2.5 16v Getrag
Print Profile(1)
Description
🏎️ Mercedes-Benz W201 190E 2.3-16 / 2.5-16 "Dogleg" Shift Knob Cap
Description / Description
EN: Restoring a legend? This is a precision-designed replacement cap for the shift knob of the Mercedes-Benz 190E W201 16V models (2.3-16 and 2.5-16). It features the iconic "Dogleg" layout with the first gear in the bottom-left position, specific to the Getrag manual transmission.
ES: Restoring a legend? This is a precision-designed replacement cap for the shift knob of the Mercedes-Benz 190E W201 16V models (2.3-16 and 2.5-16). It features the iconic "Dogleg" layout with the first gear in the bottom-left position, specific to the Getrag manual transmission.
Fitting & Scaling / Fitting and Scaling
[!CAUTION] EN: Since original shift knobs can be worn or slightly deformed by age, you must adjust the print scale (±1-2%) to ensure a perfect fit for your specific knob.
ES: Since original shift knobs can be worn or slightly deformed by age, you must adjust the print scale (±1-2%) to ensure a perfect fit for your specific knob.
Printing & Post-Processing / Printing and Finishing
EN:
- Material: ABS is mandatory. Car interiors reach high temperatures; ABS provides the necessary heat resistance to prevent warping.
- Adhesive: Use a high-temperature resistant glue (Epoxy or specialized plastic adhesive) for permanent installation.
- Finishing: To achieve an OEM look, sand the part progressively (up to 600-800 grit) and finish with a textured plastic spray paint. Note: Numbers are engraved and should remain unpainted for factory-correct appearance.
ES:
- Material: ABS is mandatory. Car interiors reach high temperatures; ABS provides the necessary heat resistance to prevent warping.
- Adhesive: Use a high-temperature resistant glue (Epoxy or specialized plastic adhesive) for permanent installation.
- Finishing: To achieve an OEM look, sand the part progressively (up to 600-800 grit) and finish with a textured plastic spray paint. Note: Numbers are engraved and should remain unpainted for factory-correct appearance.
Technical Settings / Technical Settings
- Wall Loops: 3
- Infill: 100% (for a solid, premium feel)
- Resolution: 0.1mm or 0.12mm (for maximum detail on engraving)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)