Conspit CPP Apex Pedal Face Set
Print Profile(1)
Description
I like to do sim racing wearing socks, not shoes.
But Conspit CPP APEX's stock pedal face doesn't work very well for me.
Problems and my solutions:
- Flat pedal face, even if it has holes to help friction, still feels slippery.
- Changed to curved and with friction pattern.
- Pedal Arm is short, hence pedal face is too low. My 8.5 sized feet's main compression spot, barely stay at the top edge area of the pedal face.
- Longer pedal face.
- Even if the pedal face angle is adjustable, the angle is still not good enough for me.
- Added 5 degrees of angle to the angle face.
Note 1:
I recommend to use 90~100% fill with PETG material to print. Very much indestructible.
But if you want to save some material, I've also tried 8 walls + 10% fill, works fine for brake and clutch pedal, but I'd recommend a bit mor e for the long throttle pedal face.
Note 2:
Stock screw is too short for this pedal face, please buy some M5x12mm screw.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)