Full-Scale Traffic Light Replica - Free 3D Print Model

Search models, users, collections, and posts

Sunshine Labs

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

H2C

H2D

P2S

H2S

H2D Pro

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

38 h

6 plates

5.0(1)

Open in Bambu Studio

Boost

118

Released

Bill of Materials

Bambu Filaments

Select all

Clear (32101) / Filament with spool / 1 kg

PETG Translucent

PLA Basic

List other parts

Bolts and nuts x 4: You will need 4mm diameter 40/50 mm lenght to fasten the lense and the cover to the base
3d Glue x 1: You will need to Glue the back box together as it is printed in 3 pieces. The spacer is glued to the bottom part to be attached to the top part.

Description

This full-scale traffic light replica is designed as a realistic modular build, perfect for display, props, themed décor, or interactive projects. The model consists of a central housing block for the lighting, a realistic lens printed in transparent PETG, and a front cover, all secured together with 4mm diameter bolts and nuts. Each completed section is then stacked vertically to form the full traffic light.

To bring the model to life, lighting must be added, and in my version I used RGB LED lights to recreate the authentic traffic signal look. The modular design makes the model practical to print, easy to assemble, and highly customizable depending on your preferred lighting setup and finish.

Comment & Rating (8)

@user_2355318284

very realistic top I'm making it in yellow, US style

The designer has replied

Show original

@user_1259268276

merci ! post some photos when it's done!

@user_2355318284

Replying to @user_1259268276 :

No worries I'll put them up as soon as it's finished 👍

Show original

@user_2355318284

Replying to @user_2355318284 :

Here is only the lighting left, thank you very much

Show original

@dreamit76

Print Profile

0.2mm layer, 2 walls, 15% infill

Absolute Awsome print, alot of time went into the design. Thank you very much. Be prepaired for lots of print time because its big. Took 3 rolls of black and a lttle over half a roll of translucent. Cheap for what it is. For screws use 12 #8 1,25 long machine screws with nuts. Mount on a wall if you like drilling 2 mounting holes. Weight is less than 10 lbs complete with lights. Lights, just do as designer says and use COB leds from Amazon red, yellow, green 3.2 feet for each color is more than enough unless you like sunglasses inside . Printed lens in PLA translucent turned out good but looks a little milky and doesnt effect performance at all, still looks great. Petg would look better but what I had on hand. All in all a fantastic print and the designedr worked hard on it, went together perfect with no problems.

The profile uploader has replied

@user_1259268276

Glad you like it! Thank you for your comment!

@user_3627732506

did you use a resin printer for the lenses?

The designer has replied

@user_1259268276

No, I used PETG Translucent and printed on a A1

No more

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.